Sorption of Pb(II) and Cd(II) ions from aqueous solutions by activated biomass of common reed
DOI:
https://doi.org/10.51316/jca.2020.046Keywords:
Common reed, Biomass, Activated, Heavy metals, AdsorptionAbstract
The adsorption of Pb(II) and Cd(II) ions from aqueous solution was studied by Common Reed (CR) activated with NaOH solution of 0.5 M. CR materials obtained were characterized using XRD, SEM and FT-IR. The adsorption data were studied for adsorption isotherms of Langmuir and Freundlich models. Adsorption of Pb(II) and Cd(II) ions was best fitted with Langmuir adsorption isotherm. The maximum adsorption capacity of Pb(II) and Cd(II) ions were 19.84 mg/g and 17.33 mg/g, respectively. Experimental data were also performed to the pseudo-first-order and pseudosecond-order kinetic models. The results indicated that the biosorption of Pb(II) and Cd(II) ions on activated CR biomass followed well the second-order kinetics. The results indicated that CR can be used as a low-cost adsorbent for the removal of heavy metal ions in wastewater.
Downloads
References
C.F. Carolin, P.S. Kumar, A. Saravanan, G.J. Joshiba, M. Naushad, Journal of Environmental Chemical Engineering 5 (2017) 2782. 10.1016/j.jece.2017.05.029
M.Y. Abdelnaeim, I.Y. El Sherif, A.A. Attia, N.A. Fathy, M.F. El-Shahat, International Journal of Mineral Processing 157 (2016) 80. 10.1016/j.minpro.2016.09.013
A. El Shahawy, G. Heikal, RSC Advances 8 (2018) 40511. 10.1039/c8ra07221c
D.H.K. Reddy, Y. Harinath, K. Seshaiah, A.V.R. Reddy, Chemical Engineering Journal 162 (2010) 626. 10.1016/j.cej.2010.06.010
R.F. Ribeiro, V.C. Soares, L.M. Costa, C.C. Nascentes, J Hazard Mater 237-238 (2012) 170. 10.1016/j.jhazmat.2012.08.027
J.T. Matheickal, Q. Yu, Bioresource Technology Reports 69 (1999) 223. 10.1016/S0960-8524(98)00196-5
ASTM, Standard practice for proximate analysis of coal and coke, D3172–89 ASTM, USA, 2002.
A. Sluiter, Hames, B., Ruiz, R., Scarlata, C., Sluiter, J., Templeton, D., Crocker, D., Determination of structural carbohydrates and lignin in biomass, Laboratory Analytical Procedure, National Renewable Energy Laboratory, 2008.
R. Dallel, A. Kesraoui, M. Seffen, Journal of Environmental Chemical Engineering 6 (2018) 7247. 10.1016/j.jece.2018.10.024
C. Qin, N. Soykeabkaew, N. Xiuyuan, T. Peijs, Carbohydrate Polymers 71 (2008) 458. 10.1016/j.carbpol.2007.06.019
G.B. Kankılıç, A.Ü. Metin, İ. Tüzün, Ecological Engineering 86 (2016) 85. 10.1016/j.ecoleng.2015.10.024
B. Southichak, K. Nakano, M. Nomura, N. Chiba, O. Nishimura, Water Res 40 (2006) 2295. 10.1016/j.watres.2006.04.027
H.Y. Mou, E. Heikkila, P. Fardim, Bioresour Technol 150 (2013) 36. 10.1016/j.biortech.2013.09.093
M.H. Raza, A. Sadiq, U. Farooq, M. Athar, T. Hussain, A. Mujahid, M. Salman, Journal of Chemistry 2015 (2015) 1. 10.1155/2015/293054
L.Y. Mwaikambo, M.P. Ansell, Journal of Applied Polymer Science 84 (2002) 2222. 10.1002/app.10460
E. Pehlivan, T. Altun, S. Parlayici, J Hazard Mater 164 (2009) 982. 10.1016/j.jhazmat.2008.08.115
K.S. Low, C.K. Lee, S.C. Liew, Process Biochemistry 36 (2000) 59.
D. Mohan, H. Kumar, A. Sarswat, M. Alexandre-Franco, C.U. Pittman, Chemical Engineering Journal 236 (2014) 513. 10.1016/j.cej.2013.09.057
M. López-Mesas, E.R. Navarrete, F. Carrillo, C. Palet, Chemical Engineering Journal 174 (2011) 9. 10.1016/j.cej.2011.07.026
X. Liu, C. He, X. Yu, Y. Bai, L. Ye, B. Wang, L. Zhang, Powder Technology 326 (2018) 181. 10.1016/j.powtec.2017.12.034
C. Escudero, J. Poch, I. Villaescusa, Chemical Engineering Journal 217 (2013) 129. 10.1016/j.cej.2012.11.096
Downloads
Published
Issue
Section
How to Cite
