The removal of copper (II) from aqueous solution using ETS-10 zeolite

Van-Hien Pham; Bich-Ngoc Duong; Thi-Phuong-Tu Nguyen; Ngoc-Quyen Tran; Ngoc-Duy Nguyen; Van-Phuc Dinh

doi:10.62239/jca.2024.080

Authors

Pham Van Hien Vietnam Academy of Science and Technology Author
Duong Bich Ngoc Nguyen Tat Thanh University Author
Nguyen Thi Phuong Tu Nguyen Tat Thanh University Author
Tran Ngoc Quyen Vietnam Academy of Science and Technology Author
Nguyen Ngoc Duy Vietnam Atomic Energy Institute Author
Dinh Van Phuc Nguyen Tat Thanh University Author

DOI:

https://doi.org/10.62239/jca.2024.080

Keywords:

Zeolite, ETS-10, adsorption, copper (II) ion

Abstract

Copper ion pollution from various industries is a major concern due to its detrimental impact on water quality. This study investigated the potential of ETS-10 zeolite, synthesized hydrothermally at 230°C for 24 hours, as an adsorbent for Cu(II) removal from aqueous solutions. Characterization of the synthesized ETS-10 was performed using XRD, FT-IR, and SEM-EDX techniques. The effects of pH and contact time on Cu(II) adsorption efficiency were evaluated. The concentration of Cu (II) ions before and after adsoption was recorded by the atomic absorption spectrophotometry technique (AAS). The results revealed that pH plays a critical role, with optimal adsorption observed at pH 6 and a contact time of 540 min. The Langmuir isotherm model indicated a maximum adsorption capacity of 115.02 mg/g, suggesting that ETS-10 has promising potential as a "super adsorbent" material for copper ion removal in water treatment applications.

Downloads

Download data is not yet available.

References

A.K. Mallik, S.M.F. Kabir, F. Bin Abdur Rahman, M.N. Sakib, S.S. Efty, M.M. Rahman, Journal of Environmental Chemical Engineering 10 (2022) 108048. https://doi.org/10.1016/j.jece.2022.108048

Y. Liu, H. Wang, Y. Cui, N. Chen, Int J Environ Res Public Health (2023). https://doi.org/10.3390/ijerph20053885

M.S. Salman, M.N. Hasan, M.M. Hasan, K.T. Kubra, M.C. Sheikh, A.I. Rehan, R.M. Waliullah, A.I. Rasee, M.E. Awual, M.S. Hossain, A.K.D. Alsukaibi, H.M. Alshammari, M.R. Awual, Journal of Molecular Structure 1282 (2023) 135259. https://doi.org/10.1016/j.molstruc.2023.135259

M. Priyadarshanee, S. Das, Journal of Environmental Chemical Engineering 9 (2021). https://doi.org/10.1016/j.jece.2020.104686

K.K. Fedje, A.-M. Strömvall, Journal of Environmental Management 236 (2019) 68. https://doi.org/10.1016/j.jenvman.2019.01.098

S. Virolainen, T. Wesselborg, A. Kaukinen, T. Sainio, Hydrometallurgy 202 (2021) 105602. https://doi.org/10.1016/j.hydromet.2021.105602

J. Ma, W. Huang, X. Zhang, Y. Li, N. Wang, Journal of Environmental Chemical Engineering 9 (2021). https://doi.org/10.1016/j.jece.2020.104703

T. Carpanedo de Morais Nepel, R. Landers, M. Gurgel Adeodato Vieira, A. Florencio de Almeida Neto, J Hazard Mater 384 (2020) 121416. https://doi.org/10.1016/j.jhazmat.2019.121416

J. Zheng, X. Zhang, G. Li, G. Fei, P. Jin, Y. Liu, C. Wouters, G. Meir, Y. Li, B. Van der Bruggen, Desalination 525 (2022) 115380. https://doi.org/10.1016/j.desal.2021.115380

C.G. Lee, S. Lee, J.A. Park, C. Park, S.J. Lee, S.B. Kim, B. An, S.T. Yun, S.H. Lee, J.W. Choi, Chemosphere 166 (2017) 203. 10.1016/j.chemosphere.2016.09.093

S.M. Kuznicki, US Patent 4 853 202 (1989).

S.M. Kuznicki, US Patent 4 994 191 (1990).

C.C. Pavel, D. Vuono, A. Nastro, J.B. Nagy, N. Bilba, Studies in Surface Science and Catalysis 142 (2002) 295. https://doi.org/10.1016/S0167-2991(02)80041-6

C.C. Pavel, J. B.Nagy, N. Bilba, A. Nastro, C. Perri, D. Vuono, P. De Luca, I.V. Asaftei, Microporous and Mesoporous Materials 71 (2004) 77. https://doi.org/10.1016/j.micromeso.2004.03.017

G.X.S. Zhao, J.L. Lee, P.A. Chia, Langmuir 19 (2003) 1977. https://doi.org/10.1021/la026490l

L. Lv, M.P. Hor, F. Su, X. Zhao, Journal of Colloid and Interface Science 287 (2005) 178. https://doi.org/10.1016/j.jcis.2005.01.073

L. Lv, K. Wang, X.S. Zhao, J Colloid Interface Sci 305 (2007) 218. https://doi.org/10.1016/j.jcis.2006.09.053

A. Nalaparaju, Z. Hu, X. Zhao, J. Jiang, Journal of Membrane Science 335 (2009) 89.

D. Humelnicu, I. Zinicovscaia, I. Humelnicu, M. Ignat, N. Yushin, D. Grozdov, Water 14 (2022) 857.

L. Ton-That, T.-N.-L. Huynh, B.-N. Duong, D.-K. Nguyen, N.-A. Nguyen, V.-H. Pham, T.-H. Ho, V.-P. Dinh, Environmental Monitoring and Assessment 195 (2023) 1266.

X. Ni, M. Xiang, W. Fu, Y. Ma, P. Zhu, W. Wang, M. He, K. Yang, J. Xiong, T. Tang, Journal of Porous Materials 23 (2015) 423. https://doi.org/10.1007/s10934-015-0096-5

J.H. Choi, S.D. Kim, Y.J. Kwon, W.J. Kim, Microporous and mesoporous materials 96 (2006) 157. https://doi.org/10.1016/j.micromeso.2006.03.050

J. Wang, X. Guo, Chemosphere 258 (2020) 127279. https://doi.org/10.1016/j.chemosphere.2020.127279

M.A. Al-Ghouti, D.A. Da'ana, Journal of hazardous materials 393 (2020) 122383. https://doi.org/10.1016/j.jhazmat.2020.122383

M. Vosoughi, H. Maghsoudi, S. Gharedaghi, Journal of Natural Gas Science and Engineering 88 (2021). https://doi.org/10.1016/j.jngse.2021.103862

C. Casado, Z. Amghouz, J.R. García, K. Boulahya, J.M. González-Calbet, C. Téllez, J. Coronas, Materials Research Bulletin 44 (2009) 1225. https://doi.org/10.1016/j.materresbull.2009.01.015

M. Xiang, D. Wu, RSC Adv 8 (2018) 33473. https://doi.org/10.1039/c8ra06811a

I. Zinicovscaia, N. Yushin, D. Humelnicu, D. Grozdov, M. Ignat, S. Demcak, I. Humelnicu, Water 13 (2021). https://doi.org/10.3390/w13223263

M. Xiang, F. Zhang, L. Tong, H. Wang, Y. Ding, W. Zhang, Z. Wu, Z. Zhang, X. Wei, F. Jiang, Y. Deng, Journal of Materials Science 55 (2020) 10505. https://doi.org/10.1007/s10853-020-04785-2

E. Januário, A. Nogueira, H. Pastore, Journal of the Brazilian Chemical Society (2018). 1 https://doi.org/0.21577/0103-5053.20180026

N.V. Plyasunova, M. Wang, Y. Zhang, M. Muhammed, Hydrometallurgy 45 (1997) 37. https://doi.org/10.1016/S0304-386X(96)00073-4

J. Lin, Y. Zhan, Z. Zhu, Colloids and Surfaces A: Physicochemical and Engineering Aspects 384 (2011) 9. https://doi.org/10.1016/j.colsurfa.2011.02.044

I.V. Joseph, L. Tosheva, A.M. Doyle, Journal of Environmental Chemical Engineering 8 (2020) 103895. https://doi.org/10.1016/j.jece.2020.103895

X. Pu, L. Yao, L. Yang, W. Jiang, X. Jiang, Journal of cleaner production 265 (2020) 121822. https://doi.org/10.1016/j.jclepro.2020.121822

L. Sellaoui, E.P. Hessou, M. Badawi, M.S. Netto, G.L. Dotto, L.F.O. Silva, F. Tielens, J. Ifthikar, A. Bonilla-Petriciolet, Z. Chen, Chemical Engineering Journal 420 (2021) 127712. https://doi.org/10.1016/j.cej.2020.127712

B.A. Shah, C.B. Mistry, A.V. Shah, Chemical Engineering Journal 220 (2013) 172. https://doi.org/10.1016/j.cej.2013.01.056

E.A. Abdelrahman, A. Alharbi, A. Subaihi, A.M. Hameed, M.A. Almutairi, F.K. Algethami, H.M. Youssef, Journal of Materials Research and Technology 9 (2020) 7900. https://doi.org/10.1016/j.jmrt.2020.05.052

T.A. Nguyen, D.B. Tran, H.D.C. Le, Q.L. Nguyen, V. Pham, ACS omega 5 (2020) 14481. https://doi.org/10.1021/acsomega.0c01129

G. Yao, X. Zhang, Z. Sun, S. Zheng, Journal of Porous Materials 26 (2019) 1197. https://doi.org/10.1007/s10934-019-00721-1