Research and manufacture of high purity γ-Al2O3, applied as an adsorbent to treat Rhodamine B pigment
DOI:
https://doi.org/10.51316/jca.2023.037Keywords:
Al(OH)3 Tan Rai, γ-Al2O3, surface change adjustment, SDS adsorptionAbstract
In the present study, γ-Al2O3 was fabricated from Tan Rai alumina hydroxide by some following steps: purifying alumina hydroxitde by HCl solution 5% to remove impurities, dissolving alumina hydroxitde by HCl 25% to obtain AlCl3 solution and then react AlCl3 with (NH4)2CO3 to get AACH, decomposition of AACH at 500oC to produce g-Al2O3. After that, Sodium dodecyl sulfate (SDS) was used to modify g-Al2O3 surface to increased the surface area. The material will be used to removal Rhodamine B from waste water.
The study shown that the modified γ-Al2O3 has a large specific surface area. The Rhodamine B in waste water can be completely treated by modified γ-Al2O3 at pH = 7, adsorption time 20 minutes, Rhodamine B concentration = 10 ppm with the amount of adsorbent used is 5 mg/mL.
Downloads
References
Adak, A.; Bandyopadhyay, M.; Pal, Sep. Purif. Technol 44 (2005) 139–144.
Wong, Y.C.; Szeto, Y.S.; Cheung, W.H.; McKay, G. Langmuir 19 (2003) 7888–7894
Almeida, M.R.; Stephani, R.; Dos Santos, H.F.; de Oliveira, J. Phys. Chem. A 114 (2009) 526–534
Do ˘gan, M.; Alkan, M.; Türkyilmaz, A.; J. Hazard. Mater. 109 (2004) 141–148.
Hameed, B.H.; El-Khaiary, M.I. Removal of basic dye from aqueous medium using a novel agricultural waste material: Pumpkin seed hull. J. Hazard. Mater. 155 (2008) 601–609.
Pham, T.D.; Kobayashi, M.; Adachi, Colloid Polym. Sci. 293 (2015) 1877–1886.
Thi Phuong Minh Chu, et al., Material journal 12 (2019) 450. https://doi.orrg/10.3390/ma12030450.
Takashi Shirai, et al., Materials Science 9 (2009) 23-31.
Y. Wang, et al, Journal of Alloys and Compounds; 467 (1-2) (2009) 405-412.
Tien Duc Pham et al., 14 (2017) 327-337. https://doi.orrg/10.1071/EN17102.