Study on building Sylop graph of H2S after activated carbon layer
Abstract
The Sylop of H2S vapor after the activated carbon layer were determined on the dynamic adsorption device DPS-5. The Sylop graph t = f (L) was made by the passage time of H2S after different activated carbon layers show that four different samples. The kinetic parameters was determined from experimental results dead thickness, working thickness, dynamic adsorption capacity ... Based on the experimental results of calculating the working layer thickness of the filter cartridge.
Downloads
References
Nguyễn Hùng Phong (2002), Báo cáo tổng kết đề tài cấp Bộ Quốc phòng, “Nghiên cứu thiết kế chế tạo hộp lọc phòng độc tập thể phòng chống vũ khí NBC”.
Nguyễn Hùng Phong, (2009), Báo cáo tổng kết đề tài cấp Binh chủng Hóa học “Nghiên cứu hoàn thiện công nghệ chế tạo hộp lọc, mặt nạ phòng độc công nghiệp phòng chống hơi khí độc Clo và amoniac”.
Huixing Li (2003), “Selective catalytic oxidation of hydrogen sulfide from syngas”, B.S., South China University of Technology.
Ma W., Kugler E.L., (2006), “Mo-Fe catalyst supported on activated carbon for synthesis of liquid fuels by the Fisher-Tropsch process: Effect of Mo addition on reducibility, activity, and hydrocarbon selectivity”, Energy Fuels, Vol. 20, pp. 2299.
QunDong, Xiaofei Zhao, Jian Wang, M. Ichikawa (2004), “Studies on Mo/HZSM-5 Complex catalyst for Methane Aromatization”, Journal of Natural Gas Chemistry, Vol. 13, pp. 36-40.
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
