Study the adsorption process of a column using CMS-240 carbon molecular sieves adsorbent for nitrogen gas separation

Authors

  • Pham Van Chinh
  • Le Quang Tuan
  • Nguyen Tuan Hieu
  • Vu Dinh Tien

Abstract

The component of carbon molecular sieve (CMS) is carbon. CMS takes the appearance of cylindrical black solid, contains countless 4 angstrom fine pores, it can be used to separate air into nitrogen and oxygen. In industry, CMS can concentrate nitrogen from air with PSA systems. CMS products have the character of large nitrogen yield capacity; high nitrogen recovery. It can meet the requirement of all types of PSA nitrogen systems. This paper describes the results of the study the carbon molecular sieves CMS-240 and the adsorption process of a adsorption column in nitrogen gas generator using pressure swing adsorption. This equipment was fabricated and installed at Institute of Technology of the General Department of Defense Industry for simulation and optimization research.

Downloads

Download data is not yet available.

References

Phạm Văn Chính, Vũ Đình Tiến (2018), Xây dựng mô hình thiết bị PSA, nghiên cứu, tối ưu hóa chu trình hấp phụ với áp suất thay đổi để tách khí ni tơ từ không khí, Tạp chí Nghiên cứu Khoa học và Công nghệ quân sự, số 56, p. 157-165.

Phạm Văn Chính, Vũ Đình Tiến (2018), Nghiên cứu mô phỏng thiết bị tách khí ni tơ theo chu trình hấp phụ áp suất thay đổi (PSA) bằng phần mềm Aspen Adsorption, Tạp chí Công thương, số 5+6, p. 604-610.

Phạm Văn Chính, Vũ Đình Tiến (2018), Thiết kế hệ thống đo lường, và điều khiển để nghiên cứu và tối ưu hóa thiết bị tạo khí ni tơ sử dụng chu trình áp suất thay đổi," Tạp chí Nghiên cứu Khoa học và Công nghệ quân sự, số 08, p. 269-275.

Vũ Đình Tiến (2017), Giáo trình Hấp phụ và Trao đổi ion. Nhà xuất bản Bách khoa Hà Nội.

Suzuki, Motoyuki (1990), Adsorption Engineering, University of Tokyo.

Ruthven, D.M (1984), Principles of Adsorption and Adsorption Process, New York: Wiley VCH - Publisher.

Douglas M. Ruthven, Shamsuzzanman Farroq, Kent S. Knaebel (1994), Pressure Swing Adsorption, New York: Wiley - VCH Publishers.

Published

30-07-2019

Issue

Section

Full Articles

How to Cite

Study the adsorption process of a column using CMS-240 carbon molecular sieves adsorbent for nitrogen gas separation. (2019). Vietnam Journal of Catalysis and Adsorption, 8(2), 108-114. https://jca.edu.vn/index.php/jca/article/view/585

Share